| 项目 project | 指标 index | 单位 unit | 检测方法 Detection method |
|---|---|---|---|
| 外 观 Exterior | 白色粒状 White granular | / | 20目过筛 20 mesh screen |
| 粘度（CPS@140℃) Viscosity (CPS@140℃) | 1000±100 1000±100 | CPS CPS | Brookfield Brookfield |
| 软化点 Softening Point | 125±5 125±5 | ℃ ℃ | ASTM ASTM |
| 密度（@23℃） Density (@23℃) | 0.92--0.94 0.92--0.94 | g/cm3 g/cm3 | ASTM ASTM |
| 针入度（@25℃） Penetration (@25℃) | ≤2% ≤2% | d-mm d-mm | ASTM ASTM |
| 热失重（@240℃） Thermal weight loss (@240℃) | ≤10% ≤10% | 240℃/2小时 240℃/2 hours | 恒温 constant temperature |
用于粉末涂料的蜡粉、分散性要求较高的塑料加工行业、符合美国FDA Wax powder used for powder coatings, plastic processing industries with high dispersibility requirements, in line with the US FDA
1.色粉的分散性：在色母粒生产中不仅有良好的相容性和流动性，同时粘度适中，增加了剪切力，提高了分散性；具有和各种颜料良好的可润湿性，尤其在配置高浓度色母以及较难分散的颜料，PE WAX 125显示出优异的分散性能。 1. Toner dispersibility: In the production of masterbatch, it not only has good compatibility and fluidity, but also has moderate viscosity, which increases the shear force and improves the dispersibility; it has good wettability with various pigments PE WAX 125 shows excellent dispersion performance, especially when it is equipped with high-concentration masterbatches and pigments that are difficult to disperse.
2.塑料和聚合物，增强塑料制品的表面光滑性。 2. Plastics and polymers enhance the surface smoothness of plastic products.
3.胶粘剂(热熔胶等）该产品在高温时粘度低，能够提高热熔胶的流动性，增强对粘结表面的浸润度；碳分布范围比较窄，开口时间比较小，快干性好。 3. Adhesive (hot melt adhesive, etc.) The product has a low viscosity at high temperatures, which can improve the fluidity of the hot melt adhesive and enhance the wettability to the bonding surface; the carbon distribution range is relatively narrow, the opening time is relatively small, and the quick drying is good .
4.在电缆填充化学物中，在电缆护套料中:提高添加剂（例如：氢氧化镁，氢氧化铝等）在护套料中的分散性以及与树脂结合力，从而提高整体加工性。 4. In the cable filling chemicals, in the cable sheath material: improve the dispersion of additives (such as magnesium hydroxide, aluminum hydroxide, etc.) in the sheath material and the bonding force with the resin, thereby improving the overall processability.
5.润滑剂和脱模剂，优良的金属脱模性，可以很容易地从班伯利密炼机，双辊机，以及压辊上取下来。 5. Lubricant and release agent, excellent metal release properties, can be easily removed from the Banbury mixer, double-roller, and pressure roller.
6.对胶料的烧焦性能、硫化速率或者整体物性(拉伸强度；伸长率；硬度）无不良影响,无论是生胶料、硫化物，都无喷霜和渗出性。 6. There is no adverse effect on the scorching performance, vulcanization rate or overall physical properties (tensile strength; elongation; hardness) of the rubber. No matter it is raw rubber or sulfide, there is no blooming and exudation.
25Kg/包，内塑外编织袋包装，存放在阴凉干燥处，避免日晒雨淋 25Kg/bag, packed in a woven bag with plastic inside and stored in a cool and dry place, avoid sun and rain
| 项目 project | 指标 index | 单位 unit | 检测方法 Detection method |
|---|---|---|---|
| 外 观 Exterior | 白色片状 White flake | / | |
| 滴熔点 Drop melting point | 110±5 110±5 | deg C | ASTMD938-05 |
| 针入度 @25DEG C/Penetration Penetration @25DEG C/Penetration | ≤ 2 | 0.1mm | IP 367-86(2004)(25DEG C) |
1.具有粘度低、软化点高。硬度好、无毒、热稳定性好， 高温挥发性低等性能。作为润滑剂，其化学性质稳定，电性能良好。 1. It has low viscosity and high softening point. Good hardness, non-toxic, good thermal stability, low volatility at high temperature and other properties. As a lubricant, it has stable chemical properties and good electrical properties.
2.作为添加剂可直接加到聚烯烃加工中 ，它可以增加产品的光泽性。 2. As an additive, it can be directly added to polyolefin processing, it can increase the gloss of the product.
3.改善加工性能，改善加工过程中的流动性，增加制品的挤出效率。 3. Improve processing performance, improve fluidity during processing, and increase extrusion efficiency of products.
4.改善制品表面的不良现象。消除塑料加工过程中熔体破裂，降低由于过度压力形成薄膜表面的不规则性和喷霜现象 4. Improve the surface defects of the product. Eliminate melt fracture during plastic processing, reduce the irregularities and blooming of the film surface due to excessive pressure
1.浓色母料与填充母粒的分散剂，与聚乙烯、聚氯乙烯、聚丙烯等树脂有很好的相溶性，并具有十分优异的外部润滑和内部润滑作用。 1. The dispersant for concentrated color masterbatch and filling masterbatch, has good compatibility with resins such as polyethylene, polyvinyl chloride, polypropylene, etc., and has excellent external and internal lubrication.
。 2.PVC 异型材、管材、管件、复合稳定剂和 PE、PP成型加工过程中做分散剂，润滑剂和光亮剂，增强塑化程度，提高塑料制品的韧性和表面光滑度 2. PVC profile, pipe, pipe fittings, composite stabilizer and PE, PP forming process as dispersant, lubricant and brightener to enhance the degree of plasticization, improve the toughness and surface smoothness of plastic products
3.颜料的载体，可改进油漆、油墨的耐磨性，改善颜料和填料的分散性，有良好的防沉降作用，可作油漆、油墨的平光剂，使制品有好的光泽和立体感。 3. Pigment carrier can improve the abrasion resistance of paints and inks, improve the dispersibility of pigments and fillers, and have a good anti-settling effect. It can be used as a flattening agent for paints and inks to give products a good gloss and three-dimensional effect.
4.地板蜡，汽车蜡，上光蜡，蜡烛，蜡笔等各种蜡制品的生产中，提高蜡制品的软化点，增加其强度及表面光泽度。 4. In the production of various wax products such as floor wax, car wax, glazing wax, candles, crayons, etc., increase the softening point of wax products, increase their strength and surface gloss.
5.电缆绝缘材料的润滑剂，可增强填充剂的扩散，提高挤压成型速率，增大模具流量，脱模便利。 5. The lubricant of the cable insulation material can enhance the diffusion of the filler, increase the extrusion molding rate, increase the mold flow rate, and facilitate demolding.
6.热熔胶，热固性粉末涂料，马路标志漆，划线漆的，做分散剂，有良好的防沉降作用，并使制品有好的光泽和立体感。 6. Hot melt adhesives, thermosetting powder coatings, road marking paints, marking paints, as dispersants, have a good anti-settling effect, and make the products have a good gloss and three-dimensional effect.
7.橡胶加工助剂增强填充剂的扩散，提高挤压成型速率，增大模具流量，脱模便利，提高产品脱膜后的表面光亮度及光滑度。 7. Rubber processing aids enhance the diffusion of fillers, increase the extrusion rate, increase the flow of the mold, facilitate demolding, and improve the surface brightness and smoothness of the product after the film is released.
25Kg/包，内塑外编织袋包装，存放在阴凉干燥处，避免日晒雨淋 25Kg/bag, packed in a woven bag with plastic inside and stored in a cool and dry place, avoid sun and rain
| 项目 project | 指标 index | 单位 unit | 检测方法 Detection method |
|---|---|---|---|
| 外 观 Exterior | 白色粉状 White powder | / | |
| 滴熔点 Drop melting point | 100±5 | deg C | ASTMD938-05 |
| 针入度 @25DEG C/Penetration Penetration @25DEG C/Penetration | ≤ 5 | 0.1mm | IP 367-86(2004)(25DEG C) |
1.塑料行业：应用到塑料加工中，如注塑、挤出以及造粒行业。用作PVC的外润滑剂。低黏度能提高产品的挤出效率，在混料时有助于填料的分散，特别在高填充高粘度体系的挤出中有较好的作用，能显著提高制品表面光泽。 1. Plastic industry: applied to plastic processing, such as injection molding, extrusion and pelletizing industries. Used as an external lubricant for PVC. Low viscosity can improve the extrusion efficiency of the product, help the dispersion of the filler during mixing, especially in the extrusion of high-filled high-viscosity systems, and can significantly improve the surface gloss of the product.
2.色母粒和改性塑料：生产过程中在混料时有助于颜料及填料的分散和出色滑爽性。在使用浓色时，可以有效地润湿染料，降低挤出粘度。 2. Color masterbatch and modified plastics: during the production process, it helps to disperse pigments and fillers and provide excellent smoothness. When using dense colors, it can effectively wet the dye and reduce the extrusion viscosity.
3.油墨和涂料：可以提高应用材料的耐磨性、抗皱性。 3. Inks and coatings: can improve the wear resistance and wrinkle resistance of applied materials.
4.胶粘剂：是EVA基热熔胶所使用的合成蜡。高熔点的蜡能够提高胶粘剂的耐热性和快干性。低粘度的性质可以大大降低其粘度，使树脂与聚合物的表面润湿度保持在适度范围，提高了树脂的混合效率。 4. Adhesive: It is a synthetic wax used in EVA-based hot melt adhesive. High melting point wax can improve the heat resistance and quick-drying of the adhesive. The properties of low viscosity can greatly reduce its viscosity, keep the surface wettability of resin and polymer in a proper range, and improve the mixing efficiency of resin.
5.钙锌稳定剂：协助钙锌稳定剂延长热稳定时间，降低熔体粘度，改善制品的初期着色性。 5. Calcium and zinc stabilizer: Assist the calcium and zinc stabilizer to extend the thermal stability time, reduce the melt viscosity, and improve the initial coloring of the product.
25Kg/包，内塑外编织袋包装，存放在阴凉干燥处，避免日晒雨淋 25Kg/bag, packed in a woven bag with plastic inside and stored in a cool and dry place, avoid sun and rain